SIG-Library

Query returned 507 results.

Dynamic modelling of relationships in complex service design systems

Hassannezhad, Mohammad; Cassidy, Steve; Clarkson, P. John // 2017
Today’s market conditions such as globalisation and digitalisation have made it challenging to design an effective service system that can efficiently balance organisational service capacity and ...

Empirical study of ill-supported activities in variation risk identification and assessment in early stage product development

Bjarklev, Kristian; Mortensen, Niels Henrik; Ebro, Martin // 2017
The purpose of this paper is to present findings from an industrial case study about the support of activities related to identifying and assessing variation-related issues in the design during the ...

ENCOURAGING CREATIVE RISK TO REDUCE RISK TO LIFE

Hall, Ashley; Kann, Michael Geoffrey; Ferrarello, Laura; Pulley, Robert // 2017
Encouraging creative risk to reduce risk to life explores how a collaborative, cross disciplinary design research and teaching methodology can provide a platform for tackling projects in the complex ...

Engineering design resource planning: A case study in identifying resource forecasting opportunities in research project planning

Holliman, Alexander; Thomson, Avril; Hird, Abigail // 2017
Resource forecasting is a key element to project planning, this is particularly true for research and design. Due to uncertainties inherent in such fields, resource demand forecasting is a specific ...

Engineering of assembly systems using graph-based design languages

Breckle, Theresa; Kiefer, Jens; Rudolph, Stephan; Manns, Martin // 2017
Car Manufacturers are subject to continuous and fundamental changes. Already today increasing time pressure, rising complexity and a soaring cost pressure require a shorter time to market. As ...

Enhancing the balancing while synthesizing-process - a method development project

Noubarpour, Dennis // 2017
There exist many different product and concept development methods. Many of these do not target the performance and cost-balance between sub-solutions in a concept. The management of properties ...

Entscheidungsheuristiken in der PGE - Produktgenerationsentwicklung  (Members only )

Nikola, Bursac; Simon, Rapp; Albert, Albers; Jan, Breitschuh; Narucha, Tanaiutchawoot // 2017
Product development always includes the selection of ideas from a set of potential ideas and thus pointing the way for the subsequent process. Doing this intuitively always implies the risk of not ...

Extended target weighing approach - Identification of lightweight design potential for new product generations

Albers, Albert; Revfi, Sven; Spadinger, Markus // 2017
In the development process of vehicles, especially electric vehicles, lightweight design becomes more and more important. Lightweight design efforts often result in increasing costs of a product and ...

Future-adaptability for energy and resource efficient vehicles

Nyström, Thomas; Svengren Holm, Lisbeth; van Loon, Patricia // 2017
In contrast to linear business models, circular business models (CBMs) assign the product value and its lifecycle responsibility to a manufacturer or service provider where customers get access to ...

Gathering and analysing external influences on the product design - a case study

Kammerl, Daniel; Echle, Stefan; Mörtl, Markus // 2017
The early phase of each development process is characterised by severe decisions under great uncertainty. To facilitate these decisions, it is crucial to know the (external) influences on the product ...

Identifying product development crises: The potential of adaptive heuristics

Muenzberg, Christopher; Stingl, Verena; Geraldi, Joana; Oehmen, Josef // 2017
This paper introduces adaptive heuristics as a tool to identify crises in design projects and highlights potential applications of these heuristics as decision support tool for crisis identification. ...

Identifying variability key characteristics for automation design - A case study of finishing process

Sanchez-Salas, Angel; Goh, Yee Mey; Case, Keith // 2017
This paper describes an investigation of human interaction with process ‎variability (i.e. variability not introduced by the humans themselves) in a manual manufacturing process. The process studied ...

Integrated process and data model for applying scenario-technique in requirements engineering

Graessler, Iris; Scholle, Philipp; Pottebaum, Jens // 2017
Originating from strategic management, scenario-technique yields potentials for requirements engineering. In this paper an integrated process model for such an application of scenario-technique is ...

Large-scale engineering prototyping - Approaching complex engineering problems CERN-style

Gerstenberg, Achim; Steinert, Martin // 2017
During the early concept creation phase of complex engineering problems with high degrees of uncertainty the design requirements are mostly unknown. Therefore, modules, usually used in manufacturing, ...

Lean assessment and transformation strategies in product development: a longitudinal study

Welo, Torgeir; Ringen, Geir // 2017
Maintaining simultaneous focus on efficiency and effectiveness is a difficult yet necessary strategy to deliver commercially viable products in today’s global world of competition. As a result, ...

Material selection - A qualitative case study of five design consultancies

Asbjorn Sorensen, Charlotte; Warell, Anders; Jagtap, Santosh // 2017
suggest (a) that risk management has a major influence on the material selection process, (b) that negotiations of project boundaries in the ‘fuzzy’ pre-design phase has crucial influence on the risk ...

Maturity of models in a multi-model decision support system

Johansson, Christian; Wall, Johan; Panarotto, Massimo // 2017
To reduce uncertainty in decisions, engineers experiment with models, such as, exploring what-if scenarios, and thus increase knowledge. Still, because modelling is an idealisation of reality, there ...

Mining data to design value: A demonstrator in early design

Bertoni, Alessandro; Larsson, Tobias ; Larsson, Jonas ; Elfsberg, Jenny // 2017
bility of data mining algorithms as decision support in early design stages of a complex product development project. The paper describes a scenario built in two-stages providing the rationale for ...

Model based systems engineering (MBSE) approach for configurable product use-case scenarios in virtual environments

Mahboob, Atif; Weber, Christian; Husung, Stephan; Liebal, Andreas; Krömker, Heidi // 2017
Today, the designers have to deal with a great amount of uncertainties in the design process due to the lack of information about the product, its behaviour and the context in later life-phases ...

Neural network-based survey analysis of risk management practices in new product development

Kampianakis, Andreas; Oehmen, Josef // 2017
The current study investigates the applicability of Artificial Neural Networks (ANNs) to analyse survey data on the effectiveness of risk management practices in product development (PD) projects, ...

On characterization of technology readiness level coefficients for design

Fahimian, Mahi; Behdinan, Kamran // 2017
Technology innovation is an important driving factor in creating competitive advantage in industries that have evolved by convergence of technology and design. In this industries, technology ...

Optimierung des Produktentwicklungsprozesses mittels Risikoanalyse vernetz-ter Anforderungen  (Members only )

Young-Woo, Song; Abdo, Chahin; Philipp, Scholle; Beate, Bender; Iris, Gräßle; Kristin, Paetzold // 2017
This paper presents an approach towards optimization of products and development processes based on an analysis of interrelated requirements. The approach integrates three perspectives: The first one ...

Overdesign in building services: the hidden energy use

Jones, Darren; Eckert, Claudia // 2017
This paper categorises and describes the various types of margins that are applied during building services design, and highlights the various stakeholders involved, from the early specification of ...

PLAY LAB: CREATING SOCIAL VALUE THROUGH COMPETENCY AND CHALLENGE-BASED LEARNING

Acuńa, Alejandro; Maya, Mariana; Britton, Ella; García, Mariano // 2017
Play Lab was created by the School of Design and Architecture (EDA) in Tecnológico de Monterrey campus Querétaro, as part of a pilot education model called Semester i. Play Lab aims to bring ...

Boolean Searches

The following examples demonstrate some search strings that use boolean operators:

  • design community
    Find rows that contain at least one of the two words.
  • +design +community
    Find rows that contain both words.
  • +design community
    Find rows that contain the word “design”, but rank rows higher if they also contain “community”.
  • +design -community
    Find rows that contain the word “design” but not “community”.
  • +design ~community
    Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not.
  • +design +(>community <decisions)
    Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions”
  • design*
    Find rows that contain words such as “design”, “designs”, “designing”, or “designer”.
  • "some words"
    Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.

Please sign in to your account

This site uses cookies and other tracking technologies to assist with navigation and your ability to provide feedback, analyse your use of our products and services, assist with our promotional and marketing efforts, and provide content from third parties. Privacy Policy.